Whether you are a casual rider or a seasoned racer, the need for Strengthened Maximum Ground Clearance Lower A-arms is extremely apparent.

The OEM lower A-arms on the XP1000 are simply too weak to ride with confidence in most scenarios. Buckling an OEM a-arm will ruin your day AND your wallet. From the factory, the XP1000 has 12 inches of ground clearance under the body. This is enough to get your frame over most stumps and rocks, but not you’re A-arms. If you’re like us, you’ve bent numerous OEM A-arms from sliding over/hitting rocks, stumps, or whatever else your wild ride throws at you. Here at Houser Racing, we have solved your problem by designing a Strengthened MGC (Max Ground Clearance) lower a-arm for the XP1000. Our design adds almost 2 inches of ground clearance to the middle of the A arm. We achieve this by mandrel bending 1.25” diameter high strength thick walled tubing. Contrary to popular belief, bending the tubing does not weaken it, but actually hardens it, adding extra strength to the design in addition to the stronger tubing.

Added ground clearance vs. OEM – 1.816 inches

Stronger than OEM

Maintains stock track width

Optimized ball joint holder angle so that ball joints never hit their limits anywhere in travel

Can be paired with OEM/Aftermarket Ball Joints (Ball joints are NOT included)

8x Dust Washers

4x Hardened and Ground Pivot Sleeves

8x Needle Bearings

2x 90 Degree Grease Zerks

8x Thrust Washers